1  REMOVE THE TAPE HOLDING THE COIL TOGETHER.
2  TAPE BOTH ENDS OF TUBING CLOSED.
3  TAPE INSIDE END OF COIL TO NEXT SINGLE COIL. 

Keep the uncoiler back as far as you can from the wall. This will help to keep the tubing from coming over the top of the uncoiler and will reduce the chance of kinking the tubing.

TUBING INSTALLED WITH  TWISTS 
CAN CLOSE-OFF THE WATER FLOW
AT A LATER DATE AND WILL NOT LAY FLAT

It is important that the tube is installed without any twists.
The best way, is to use a uncoiler or to roll the tubing out.
DO NOT TAKE THE TUBING OFF THE SIDE OF THE COIL!